3 pack white LED micro effect light with flash blink strobe control 9 volt battery operated for props and scenery

Description

The MEL (Micro Effects Light) is a simple LED light source with a DC barrel type connector. The MEL operates from 9 – 12 volts DC which allows for a effects system operating from a 9 volt battery. The MEL is optimized for high light output at 9 volts DC with a nominal power of 0.18 watts operating at 20ma ref. Well suited for various LED lighting applications such as: scenery, props, models, animatronics, robotics, Fx- special effects, Gaffer’s tool utility flashlight, and costumes. This kit includes 3 pcs Warm White MEL, 3 pcs MED1 (Micro Effects Dimmer) control, and 3 pcs 9 volt battery clips. The overall length of the light, control and the clip is 20″ ref. For effects projects, the Micro Effects Light can be secured with Gaffer’s tape or hot melt glue. The MED1 Micro Effects Dimmer provides dimming, multimode effects, and on / off control of 5 – 24 volt DC LED lights. The unit features a simple tactile three button interface: light, speed, and mode. • The Light button is used in static mode for dimming. Note the Static (0 mode) dimming function is between effects #8 and #1 when sequencing through the modes. • The Speed (On/Off) button provides ten speed levels for the effects modes and is also used to turn the unit off when it is held longer than 3 seconds. • The Mode button provides eight dynamic effects, and the Static (0 mode) between effects #8 and #1. 0) Static mode for dimming 1) Up / Down – ramp up on ramp down off – repeat 2) Up / Down – flame flicker – always on 3) Strobe – fast 4) Blinking – long off 5) Blinking – long on 6) Flash – burst of pulses (emergency vehicle light) 7) Strobe – slow (beacon light) 8) Up / Down varying brightness – brief off – repeat
The LED lens is clear with a 30 degree output angle for a narrow beam
The MED1 Micro Effects Dimmer provides dimming and multimode effects
Color warm white 3,200 kelvin Typ. 4 lumen ref.
3 pack lights, controllers, and 9 volt battery clips. COO: China. Batteries not included
MEL Light Body shell: ABS (black), length 1.42″ ref. x 0.48″ dia. Ref.
SOAP Fault: (faultcode: WSDL, faultstring: SOAP-ERROR: Parsing WSDL: Couldn't load from 'http://webservices.amazon.com/AWSECommerceService/AWSECommerceService.wsdl' : failed to load external entity "http://webservices.amazon.com/AWSECommerceService/AWSECommerceService.wsdl" )
SOAP Fault: (faultcode: WSDL, faultstring: SOAP-ERROR: Parsing WSDL: Couldn't load from 'http://webservices.amazon.com/AWSECommerceService/AWSECommerceService.wsdl' : failed to load external entity "http://webservices.amazon.com/AWSECommerceService/AWSECommerceService.wsdl" )